Once it hits the target temperature, you can load or unload filament. This is a default temperature and the temperature setting you will use for actual prints depends on the material you are using and your own personal preferences. To load or unload filament, set the target temperature for the extruder in question to about 225° C.
To set a target for any of these, just type the target temperature (in Celsius) into any of the boxes on the left and then hit enter. There’s a color-coded realtime readout of the temperatures for your extruder or extruders, as well as the heated platform. In the lower right, you’ll see the temperature settings. We highly recommend the “Continuous Jog” setting here, but you can also move the axes by predetermined increments. The labels are arranged to match the direction of movement that you’ll see on the printer, and the plus or minus matches the direction you’ll see in the G Code. On the left side of the control panel window, you can use the axis buttons superimposed on the image of your Wanhao 3D printer to move each axis. You can change or load filament by heating up your extruders and then using the extruder motors. From there, you can move the X,Y, and Z axes, control the heat of your extruders and platform, and move your extruder motors backward and forward. You can access it by clicking on the button with four arrows at the upper center of Replicator G's main screen. Replicator G’s control panel is a handy utility that allows you to test all of your printer’s functionality. If your machine doesn’t connect properly, go back to You’ll see the band just below the menu buttons turn light green if everything goes OK.
#Wanhao duplicator 4s on repetier server software
The Replicator G software will try to connect to your printer. Make sure your computer is connected to your Wanhao 3D printer with the supplied USB cable and then open Replicator G.
0 kommentar(er)
